# Soft plastic lure mold generator

Design a printable two-part mold for soft plastic lures: paddle tail shad, stick, twister, craw and grub / worm. Change any size, then download 3MF or STL ready to print in PETG or ASA and pour with plastisol.

- Page: https://paramlet.com/tools/soft-plastic-lure/
- Tool id: `soft-plastic-lure` · API version 1 · docs: https://paramlet.com/agents/
- Parameter schema (JSON Schema): https://paramlet.com/tools/soft-plastic-lure/schema.json · lure-type presets: https://paramlet.com/tools/soft-plastic-lure/presets.json
- Lure types (`lureFamily`): `paddle_shad` (Paddle tail (shad)), `stick` (Stick), `twister` (Twister (curly tail)), `craw` (Craw), `grub_worm` (Grub / worm). Defaults: paddle_shad, two-part mold on, 1 cavity, open pour, vents on.
- Deep link with parameters: `https://paramlet.com/tools/soft-plastic-lure/?p=<url-encoded JSON>`, e.g. `https://paramlet.com/tools/soft-plastic-lure/?p=%7B%22L%22%3A100%2C%22tailType%22%3A%22paddle%22%7D`, or single values `?L=100&tailType=paddle&mold=1`
- Deep link with a project: `https://paramlet.com/tools/soft-plastic-lure/#project=<base64url project JSON>` (no photo; 8,000 characters max)
- In the page: `window.paramlet` (getSchema, getParams, getState, setParams, loadProject, getProject, exportModel, exportSTL, export3MF).
- WebMCP tools: `lure_get_parameter_schema`, `lure_get_state`, `lure_set_parameters`, `lure_load_project`, `lure_download`.
- Validation: unknown keys and out-of-range values are rejected; nothing is applied from an invalid request.
- Output: 3MF (default) or binary STL files in a .zip, millimetres. Mold on: both halves flat on the bed, cavity up. Mold off: the lure body. Includes README.txt (material, safety) and parameters.json.
- Downloads: free and unlimited at launch; API exports use the same download path as the button. Saving or opening projects never counts as a download.
- Export types: `3mf` and `stl` today; `master`, `cnc_mold` and `2d_template` are reserved names for later.

## Features

- Five lure types: paddle tail (shad), stick, twister, craw and grub / worm — every size adjustable
- Two-part mold with alignment pins, adjustable pin clearance for flash control and a border for clamps or rubber bands
- Open-pour funnel or a hand-injector port with a tapered runner
- Air vents from the tail, paddle, leg and claw tips to the edge of the mold
- 1, 2, 4 or 6 cavities per mold
- Halves exported flat with the cavity facing up — no supports needed
- Ribs, grooves, dimples, bends, eye sockets, hook channel, weedless slot and a shape traced from a photo
- Millimetres or inches in the controls; files are always in millimetres
- Projects you can save and reopen, and links that carry the settings

## FAQ

**Is it free?**
Yes. Every lure type and mold feature is free, with no account.

**What file do I get?**
A 3MF (or STL files in a zip) in millimetres with both mold halves lying flat, cavity up, plus a README with material and safety notes and your settings (parameters.json).

**What should I print the mold in?**
PETG or ASA on an FDM printer, or a high-temperature resin for a longer life. PC works for experienced users. PLA is only good for a fit check: it warps with hot plastisol. A printed mold lasts dozens of pours, not production runs.

**Is pouring plastisol safe?**
Plastisol is poured at about 170 °C. Keep the mold, tools and colourants completely dry (water in hot plastisol spatters), work with ventilation, and wear eye protection and heat-resistant gloves.

**Can I use a hand injector?**
Yes. Choose “Hand injector” and the mold gets a port for the nozzle with a tapered runner into the cavity and vents at the far end.

**Are my designs uploaded?**
No. The geometry is computed in your browser; settings and photos stay on your device.

## Parameters

| key | label | type | range / values | default |
|---|---|---|---|---|
| `lureFamily` | Lure type | string | paddle_shad|stick|twister|craw|grub_worm | "paddle_shad" |
| `L` | Body length | integer | 30–200 mm (step 1) | 100 |
| `Dh` | Head diameter | number | 2–25 mm (step 0.1) | 14 |
| `Db` | Body diameter | number | 2–30 mm (step 0.1) | 18 |
| `Dt` | Tail diameter | number | 0.5–16 mm (step 0.1) | 8 |
| `Dtip` | Tail tip diameter | number | 0.3–18 mm (step 0.1) | 2 |
| `flat` | Height / width | number | 0.4–1.6 × (step 0.01) | 1.25 |
| `section` | Shape | string | round|rect|tri|rhomb | "round" |
| `cornerR` | Rectangle corner radius | number | 0–5 mm (step 0.05) | 1 |
| `secRound` | Triangle / diamond rounding | number | 0–1  (step 0.01) | 0.35 |
| `belly` | Flat belly | number | 0–0.6  (step 0.01) | 0.15 |
| `keelH` | Keel height | number | 0–3 mm (step 0.05) | 0 |
| `keelW` | Keel width | integer | 8–60 ° (step 1) | 25 |
| `keelStart` | Keel start | integer | 0–90 % (step 1) | 15 |
| `keelEnd` | Keel end | integer | 10–100 % (step 1) | 70 |
| `headType` | Head type | string | bullet|cone|flat|fish | "fish" |
| `headCap` | Head rounding | number | 0.5–12 % (step 0.1) | 6 |
| `neck` | Neck position (end of head) | number | 2–20 % (step 0.1) | 12 |
| `neckPinch` | Neck pinch | number | 0.6–1.15 × (step 0.01) | 1 |
| `neckEnd` | Neck end (full diameter) | number | 5–60 % (step 0.5) | 38 |
| `bodyEnd` | Taper start | integer | 20–80 % (step 1) | 48 |
| `tailStart` | Tail start | integer | 40–95 % (step 1) | 82 |
| `tipStart` | Tail tip start | number | 60–99 % (step 0.5) | 96 |
| `bend` | S-curve | number | 0–15 mm (step 0.5) | 0 |
| `gill` | Gill notch | number | 0–1.5 mm (step 0.05) | 0 |
| `eyeD` | Eye diameter (0 = none) | number | 0–8 mm (step 0.1) | 3 |
| `eyePos` | Eye position | number | 1–20 % (step 0.1) | 8 |
| `eyeAngle` | Eye height (angle) | integer | -30–70 ° (step 1) | 15 |
| `eyeDepth` | Socket depth | number | 0.1–3 mm (step 0.05) | 0.6 |
| `concave` | Concave sides (depth) | number | 0–2 mm (step 0.05) | 0 |
| `concaveW` | Concave width | integer | 20–80 ° (step 1) | 55 |
| `grooveN` | Number of grooves (0 = none) | integer | 0–8  (step 1) | 0 |
| `grooveW` | Groove width | integer | 3–40 ° (step 1) | 10 |
| `grooveDepth` | Groove depth | number | 0.05–1.5 mm (step 0.05) | 0.3 |
| `grooveStart` | From | integer | 0–90 % (step 1) | 8 |
| `grooveEnd` | To | integer | 10–100 % (step 1) | 80 |
| `dimN` | Rows along the length (0 = none) | integer | 0–40  (step 1) | 0 |
| `dimAround` | Dimples around | integer | 1–12  (step 1) | 6 |
| `dimD` | Dimple diameter | number | 0.5–5 mm (step 0.1) | 1.6 |
| `dimDepth` | Socket depth | number | 0.05–1.5 mm (step 0.05) | 0.3 |
| `dimStart` | From | integer | 0–90 % (step 1) | 10 |
| `dimEnd` | To | integer | 10–100 % (step 1) | 60 |
| `ribs` | Number of ribs | integer | 0–150  (step 1) | 0 |
| `ribDepth` | Depth | number | 0–1.5 mm (step 0.01) | 0.3 |
| `ribProfile` | Profile | string | round|sharp|saw | "round" |
| `ribSharp` | Sharpness | number | 1–8  (step 0.5) | 3 |
| `ribCover` | Where | string | full|belly|sides|back | "full" |
| `spiral` | Spiral (turns) | integer | 0–4  (step 1) | 0 |
| `pitchVar` | Pitch change (− denser at head / + at tail) | number | -0.8–0.8  (step 0.05) | 0 |
| `ribStart` | Start | number | 0–50 % (step 0.5) | 7 |
| `ribEnd` | End | number | 50–100 % (step 0.5) | 93 |
| `headRings` | Rings on the head | integer | 0–4  (step 1) | 2 |
| `tailType` | Tail type | string | pin|paddle|twister|vtail|spoke | "paddle" |
| `tailT` | Tail thickness | number | 0.3–3 mm (step 0.05) | 1.2 |
| `paddleW` | Width | number | 2–40 mm (step 0.5) | 22 |
| `paddleH` | Height | number | 2–40 mm (step 0.5) | 18 |
| `paddleAngle` | Angle to body | integer | 30–90 ° (step 1) | 80 |
| `twLen` | Length | integer | 8–80 mm (step 1) | 30 |
| `twW` | Width | number | 2–20 mm (step 0.5) | 7 |
| `twCurl` | Curl | integer | 30–320 ° (step 5) | 200 |
| `vLen` | Branch length | number | 3–40 mm (step 0.5) | 12 |
| `vSpread` | Spread | integer | 5–60 ° (step 1) | 25 |
| `vW` | Branch width | number | 0.5–8 mm (step 0.1) | 2.5 |
| `spokeN` | Count | integer | 2–4  (step 1) | 3 |
| `spokeLen` | Length | number | 3–30 mm (step 0.5) | 10 |
| `spokeD` | Tip diameter | number | 0.2–2 mm (step 0.05) | 0.6 |
| `spokeSpread` | Spread | integer | 5–60 ° (step 1) | 25 |
| `legsN` | Leg pairs (0 = none) | integer | 0–8  (step 1) | 0 |
| `legLen` | Leg length | number | 2–30 mm (step 0.5) | 8 |
| `legD` | Leg diameter | number | 0.4–4 mm (step 0.05) | 1 |
| `legStart` | From | integer | 3–90 % (step 1) | 15 |
| `legEnd` | To | integer | 5–95 % (step 1) | 45 |
| `legAngle` | Rake backwards | integer | 0–80 ° (step 1) | 45 |
| `claws` | Add claws | integer | 0|1 | 0 |
| `clawPos` | Position | integer | 40–100 % (step 1) | 85 |
| `clawLen` | Length | number | 4–45 mm (step 0.5) | 14 |
| `clawW` | Width | number | 1.5–18 mm (step 0.1) | 5 |
| `clawSpread` | Spread | integer | 0–60 ° (step 1) | 30 |
| `chan` | Hook channel along the axis | integer | 0|1 | 0 |
| `chanD` | Channel diameter | number | 0.4–4 mm (step 0.05) | 1.2 |
| `chanLen` | Channel length | number | 3–120 mm (step 0.5) | 25 |
| `slot` | Slot in the back | integer | 0|1 | 0 |
| `slotStart` | From | number | 5–90 % (step 0.5) | 30 |
| `slotEnd` | To | number | 10–95 % (step 0.5) | 60 |
| `slotW` | Width | number | 0.2–3 mm (step 0.05) | 0.8 |
| `slotDepth` | Depth (fraction of thickness) | number | 0.1–0.95  (step 0.01) | 0.5 |
| `rattle` | Capsule cavity | integer | 0|1 | 0 |
| `rattleD` | Diameter | number | 1–10 mm (step 0.1) | 3 |
| `rattleLen` | Length | number | 2–40 mm (step 0.5) | 12 |
| `rattlePos` | Position | number | 10–80 % (step 0.5) | 35 |
| `mold` | Generate a two-part mold | integer | 0|1 | 1 |
| `moldPlane` | Parting plane | string | horiz|vert | "horiz" |
| `moldWall` | Wall under the cavity | number | 3–20 mm (step 0.5) | 6 |
| `moldMargin` | Border around cavities | number | 8–30 mm (step 0.5) | 12 |
| `moldChamfer` | Outer edge chamfer | number | 0–4 mm (step 0.1) | 1 |
| `cavN` | Cavities per mold | integer | 1|2|4|6 | 1 |
| `cavGap` | Gap between cavities | number | 3–20 mm (step 0.5) | 6 |
| `fillMode` | How you fill it | string | pour|inject | "pour" |
| `spruePos` | Fill point | string | head|tail | "head" |
| `sprueD` | Sprue diameter at the lure | number | 1.5–10 mm (step 0.1) | 4 |
| `sprueFunnel` | Funnel diameter (outside) | number | 4–20 mm (step 0.1) | 7 |
| `injectPortD` | Port diameter (injector nozzle) | number | 10–20 mm (step 0.1) | 16 |
| `vents` | Air vents from tail, leg and claw tips | integer | 0|1 | 1 |
| `ventW` | Vent width | number | 0.3–3 mm (step 0.05) | 1.2 |
| `ventDepth` | Vent depth (each half) | number | 0.05–1 mm (step 0.05) | 0.3 |
| `pinN` | Number of pins | integer | 4|2 | 4 |
| `pinType` | Pin shape | string | round|cone | "round" |
| `pinD` | Pin diameter | number | 2–8 mm (step 0.1) | 4 |
| `pinH` | Pin height | number | 1–8 mm (step 0.1) | 3 |
| `pinClear` | Pin clearance (flash control) | number | 0.05–0.8 mm (step 0.05) | 0.25 |
| `boltD` | Bolt holes (0 = none) | number | 0–8 mm (step 0.1) | 0 |
| `coreRod` | Wire hole for the hook channel (through the head) | integer | 0|1 | 0 |
| `moldSlot` | Slot as a blade in the mold (if slot is on) | integer | 0|1 | 1 |
| `materialHint` | Mold material | string | petg|asa|resin|pc | "petg" |
| `splitN` | Number of parts | integer | 1–4  (step 1) | 1 |
| `splitPin` | Hole for a joining pin | integer | 0|1 | 1 |
| `splitPinD` | Pin diameter | number | 0.4–3 mm (step 0.05) | 1 |
| `res` | Resolution (segments around) | integer | 16–96  (step 4) | 48 |
| `useTraceProfile` | Use diameters from the photo | integer | 0|1 | 0 |
| `useTraceBend` | Use the curve from the photo | integer | 0|1 | 0 |
| `traceDiam` | Diameter correction | number | 0.5–1.6 × (step 0.01) | 1 |
| `traceBend` | Curve strength | number | 0–2 × (step 0.05) | 1 |
| `traceSens` | Sensitivity (− more / + less) | number | -0.7–0.7  (step 0.05) | 0 |
| `traceSmooth` | Smoothing | integer | 0–12  (step 1) | 3 |
| `traceFlip` | Swap head and tail | integer | 0|1 | 0 |
| `traceMirror` | Mirror | integer | 0|1 | 0 |
| `imgShow` | Show photo | integer | 0|1 | 1 |
| `imgOpacity` | Opacity | number | 0.1–1  (step 0.05) | 0.85 |
| `imgScale` | Scale | number | 0.3–3 × (step 0.01) | 1 |
| `imgRot` | Rotation | number | -180–180 ° (step 0.5) | 0 |
| `imgDX` | Offset sideways | number | -60–60 mm (step 0.5) | 0 |
| `imgDZ` | Offset along the length | number | -100–100 mm (step 0.5) | 0 |
| `color` | Colour (preview only) | string | string | "#ff6a3d" |
| `showParts` | Show part boundaries | integer | 0|1 | 0 |
| `units` | Units shown | string | mm|in | "mm" |
| `exportFormat` | File format | string | 3mf|stl | "3mf" |
| `exportTol` | Mesh precision | number | 0|0.01|0.02 | 0.02 |
| `bends` | Bends and extra sections | array | array | [] |
| `trace` | Traced profile | object|null | object|null | null |
