Design a printable two-part mold for soft plastic lures: paddle tail shad, stick, twister, craw and grub / worm. Change any size, then download 3MF or STL ready to print in PETG or ASA and pour with plastisol.
Features
- Five lure types: paddle tail (shad), stick, twister, craw and grub / worm — every size adjustable
- Two-part mold with alignment pins, adjustable pin clearance for flash control and a border for clamps or rubber bands
- Open-pour funnel or a hand-injector port with a tapered runner
- Air vents from the tail, paddle, leg and claw tips to the edge of the mold
- 1, 2, 4 or 6 cavities per mold
- Halves exported flat with the cavity facing up — no supports needed
- Ribs, grooves, dimples, bends, eye sockets, hook channel, weedless slot and a shape traced from a photo
- Millimetres or inches in the controls; files are always in millimetres
- Projects you can save and reopen, and links that carry the settings
How to use
- Pick a lure type.
- Change the length, diameters, tail and details — or keep the tested defaults.
- Check the mold settings: cavities, open pour or injector, pin clearance.
- Press Download model and print both halves in PETG or ASA, cavity side up.
- Clamp the halves together and pour plastisol at about 170 °C.
Frequently asked questions
Is it free?
Yes. Every lure type and mold feature is free, with no account.
What file do I get?
A 3MF (or STL files in a zip) in millimetres with both mold halves lying flat, cavity up, plus a README with material and safety notes and your settings (parameters.json).
What should I print the mold in?
PETG or ASA on an FDM printer, or a high-temperature resin for a longer life. PC works for experienced users. PLA is only good for a fit check: it warps with hot plastisol. A printed mold lasts dozens of pours, not production runs.
Is pouring plastisol safe?
Plastisol is poured at about 170 °C. Keep the mold, tools and colourants completely dry (water in hot plastisol spatters), work with ventilation, and wear eye protection and heat-resistant gloves.
Can I use a hand injector?
Yes. Choose “Hand injector” and the mold gets a port for the nozzle with a tapered runner into the cavity and vents at the far end.
Are my designs uploaded?
No. The geometry is computed in your browser; settings and photos stay on your device.
For AI agents and developers: API v1, schema.json, index.md. Open-source licences